Home > News >

UWE turntable bearings

Date: 2015-03-23 13:57
UWE turntable Bearings sometimes referred to as slewing ring bearings, are 4 point contact thin section type ball bearings.  Preload can be reduced for low torque or increased for high rigidity requirements.  
UWE turntable bearings can be used for excavators, cranes,trailers,trucks and many other machinery.
UWE turntable bearings can accommodate axial, radial and moment loads acting single or in combination and in any direction. They are not mounted in a housing or on a shaft, but directly to a seating surface. The inner and outer ring are supplied with mounting holes. Both rings may have integral gears. They are also referred to as slewing rings and tabletop bearings. Slewing ring bearing can perform oscillating (slewing) as well as rotating movements. They may be used without gears or with internal or external gears.
Slewing ring bearings can take moment load and radial load, besides take thrust loads; There are ball bearing, roller bearing and ball-roller bearing at type; There are single-row, double-row and three-row at structure. With teeth and without teeth on conduction(outer or inner ring); At dustproof and leak grease proof type, with airproof and without airproof. At mounting with flanged(outer or inner ring), with bolt hole and without flanged.