Home > Inspection > Measurement Equipment > Abrasion wheel dynamic balance calibration

Abrasion wheel dynamic balance calibration

Abrasion wheel dynamic balance calibration instrument
Factory:Hongfuxin Co., Ltd
Model:GB-702 (semi-automatic,display balance block deviation angle automatically after mounting. manually adjust balance block)
Factory No:81272
Company No:UWE-PHY-01
Technical index:
1.mainframe dimensions:283×170×45mm;
2.working temperature:0℃-50℃;
3.min.correction value:0.1mg 0.05mm/s 0.01µm (1800rpm);
4.max. correction value:50g (acceleration);
5.vibration measurement unit:displacement(µm:peak to peak);
6phase angle correction precision0.1°;accelerate gauge sensitivity:100mV/g;
7.revolving speed range correction:400-20000rpm;
8.Speed sensor method:light probe sensor;speed sensor distance:50mm-100mm.
Requirement:
1.before grinding wheel dynamic balance,mark angle plate(360°dial)on disc.
2.paste reflector on wheel or disc side,put light probe sensor at distance of 6mm.
Usage:Test abrasion wheel balance when wheel working.